tombstones
i have some of those pre-made tombstones that come with the 2 stakes that you put in the bottom and then stab into the ground. they are about 2 ft tall. is there anyway for me to make them more secure and/or weather proof. they are very light weight so i am afraid they will fall over. also how do they hadle weather?
- Stranger with candy
- Master Reaper
- Posts: 161
- Joined: Wed Oct 03, 2007 12:33 pm
- What is the highest number?: 9
- Location: FW Texas
we used the stakes that came with ours last year- and they wound up in the neighbors yard/down the street etc.
This year we made our own and I secured them using metal hangers. I just cut an 8" piece, bent it in a u shape and looped it through and then stuck it in the ground. I'm using about 3 U shaped wires per tombstone. They're holding pretty well BUT I think they're something I'm going to have to maintain throughout the month because some do fall over- no matter what.
I think the key is to figure out which way the northern wind comes in to your yard. Then arrange the tombstone at an angle so the wind cuts around it- rather than having it facing (front or back) directly into the wind.
This year we made our own and I secured them using metal hangers. I just cut an 8" piece, bent it in a u shape and looped it through and then stuck it in the ground. I'm using about 3 U shaped wires per tombstone. They're holding pretty well BUT I think they're something I'm going to have to maintain throughout the month because some do fall over- no matter what.
I think the key is to figure out which way the northern wind comes in to your yard. Then arrange the tombstone at an angle so the wind cuts around it- rather than having it facing (front or back) directly into the wind.
- Halliance
- Ghost
- Posts: 10
- Joined: Wed Sep 19, 2007 10:31 am
- What is the highest number?: 9
- Location: Winterpeg
- Contact:
If you're a bit of a handyman, you can create a wooden base for it. This article (from Screaming Scarecrow Studios) goes into detail on constructing one - scroll down to "Attach a Wood Base."
http://halloweenalliance.com/howto/yard ... bstone.htm
For something less elaborate, the metal hangers definitely work. I asked a friend for his advice (he likes to call himself the Lurking Lunatic, so he asked to be referred to as such!) He wrote the article in the URL above, and he says this:
If the tombstone is made of stryofoam it will weather hot, cold
temps and water just fine as is. However, styrofoam breaks down under UV rays, so limit the amount of time they are displayed - in other words don't leave them out for months at a time. 2 to 3 weeks at Halloween time is ok though.
The last thing to keep in mind about the Styrofoam and UV rays is that the
paint on the tombstone will protect it somewhat from the rays. If the
tombstone has lots of paint on it from the factory it should be pretty
good, if it doesn't and you feel you're up to the task repaint it with
latex paint and have some fun with it!
We seldom buy something off the shelf and just put it into our haunts, we often amp them up a bit!
Hope this helps. Have fun!
http://halloweenalliance.com/howto/yard ... bstone.htm
For something less elaborate, the metal hangers definitely work. I asked a friend for his advice (he likes to call himself the Lurking Lunatic, so he asked to be referred to as such!) He wrote the article in the URL above, and he says this:
If the tombstone is made of stryofoam it will weather hot, cold
temps and water just fine as is. However, styrofoam breaks down under UV rays, so limit the amount of time they are displayed - in other words don't leave them out for months at a time. 2 to 3 weeks at Halloween time is ok though.
The last thing to keep in mind about the Styrofoam and UV rays is that the
paint on the tombstone will protect it somewhat from the rays. If the
tombstone has lots of paint on it from the factory it should be pretty
good, if it doesn't and you feel you're up to the task repaint it with
latex paint and have some fun with it!
We seldom buy something off the shelf and just put it into our haunts, we often amp them up a bit!
Hope this helps. Have fun!
They who dream by day are cognizant of many things which escape those who dream only by night.
- Good ol' Poe
- Good ol' Poe
- Britishwitch
- Master Reaper
- Posts: 133
- Joined: Sat Sep 01, 2007 6:09 pm
- What is the highest number?: 9
- Location: England
- Dutchess of Darkness
- Halloween Master
- Posts: 1708
- Joined: Mon Mar 19, 2007 10:56 pm
- What is the highest number?: 9
- Location: Chilliwack British Columbia Canada
- Halliance
- Ghost
- Posts: 10
- Joined: Wed Sep 19, 2007 10:31 am
- What is the highest number?: 9
- Location: Winterpeg
- Contact:
Waved right here:
http://halloween.com/bb/viewtopic.php?p ... ght=#17523
I'd love to take credit for the the ideas, but my friend is the Master (cue Darth Vader). I'm helping him construct his haunt, and having a lot of (ouch!) fun with prickly chicken wire!
http://halloween.com/bb/viewtopic.php?p ... ght=#17523
I'd love to take credit for the the ideas, but my friend is the Master (cue Darth Vader). I'm helping him construct his haunt, and having a lot of (ouch!) fun with prickly chicken wire!
They who dream by day are cognizant of many things which escape those who dream only by night.
- Good ol' Poe
- Good ol' Poe
- Stranger with candy
- Master Reaper
- Posts: 161
- Joined: Wed Oct 03, 2007 12:33 pm
- What is the highest number?: 9
- Location: FW Texas
so my tombstones have been a bit tricky mastering...the wind has been such a punk the last couple of days So, I've been using these little plastic do-dad's that I picked up last year on clearance..
one in the front (neck down) and one in the back seems to do the trick as far as flopping over goes, plus it gives a nice creepy crickety sound when the tombstones fall down and stand back up in the wind
one in the front (neck down) and one in the back seems to do the trick as far as flopping over goes, plus it gives a nice creepy crickety sound when the tombstones fall down and stand back up in the wind
- putrid
- Crypt Keeper
- Posts: 56
- Joined: Tue Sep 04, 2007 10:12 pm
- What is the highest number?: 9
- Location: TEXAS
- Contact:
I went to a craft supply store and bought some wooden dowels. I cut them each 8 inches long and then put 4 inched into the ground and 4inches in to the tombstone ( 2 dowel spikes per tombstone).. they have lasted pretty well and we have a had a couple storms since I put them in.... there was one I was a little worried about so I added a little glue to it.... I to had problems with my tombstones flying away last year.. just having a pole a little deeper in the ground and the tombstone seems to work.
In the Mouth of Madness (John Carpenter):
"The insane could easily become the majority and you would find yourself locked in a padded cell."
"The insane could easily become the majority and you would find yourself locked in a padded cell."
- mesmark
- Zombie
- Posts: 24
- Joined: Tue Sep 25, 2007 10:43 am
- What is the highest number?: 9
- Location: Japan
- Contact:
A little late to this thread as it looks like you've got it figured out, but...
I made my own and to support them, I used 'L' shaped brackets that were about 6 inches long both ways. Then I added a wood board (1 foot) to the bottom and burried it.
That will keep them standing up against the wind, but you'll need support to keep them from snapping in half. Any straight pole will do.
These are the three I made.
I made my own and to support them, I used 'L' shaped brackets that were about 6 inches long both ways. Then I added a wood board (1 foot) to the bottom and burried it.
That will keep them standing up against the wind, but you'll need support to keep them from snapping in half. Any straight pole will do.
These are the three I made.
- Rising Dead Man
- Halloween Master
- Posts: 3392
- Joined: Thu May 01, 2008 5:06 pm
- What is the highest number?: 9
- Location: Eerie Acres Cemetery
- Contact:
Re: tombstones
My problem with gravestones is that the stakes might rip through the back of them and they will fall over. I want to keep them up with something more than just stakes. I put a brick in the front and back of each one but I want some other way to keep them up. Is there a really good way to keep them up good that is not easy to see? You can see the bricks on the stone easy. But I want a way to keep them up that you can not see.
Halloween wraps fear in innocence,
As though it were a slightly sour sweet.
Let terror, then, be turned into a treat...
~Nicholas Gordon
As though it were a slightly sour sweet.
Let terror, then, be turned into a treat...
~Nicholas Gordon
- Rising Dead Man
- Halloween Master
- Posts: 3392
- Joined: Thu May 01, 2008 5:06 pm
- What is the highest number?: 9
- Location: Eerie Acres Cemetery
- Contact:
Re: tombstones
What I mean is, is there something I can use to keep them up that that you can not see? I used bricks but they are visible. I want to use something that you can not see.
Halloween wraps fear in innocence,
As though it were a slightly sour sweet.
Let terror, then, be turned into a treat...
~Nicholas Gordon
As though it were a slightly sour sweet.
Let terror, then, be turned into a treat...
~Nicholas Gordon