Post
by Pumpkin_Man » Mon Jun 13, 2011 9:10 am
Castle, a film camera is just that. You have to load in a roll of film, take the pictures, (24 or 36 exposures usualy) and then after you rewind the film back into the cassette, you bring it to a drug store or a camera store to have the negatives processed, and then prints made. After a couple of days, or in some cases you can get 1 hour processing, you get a print of each frame from the original negatives and the original negatives back. If that was the case of that photo you posted, then the "orbs" are likely an inperfection on the paper used to make the print. You can double check the negative, and if you don't have "orbs" on the negative, then that's likely what it is. If you do have "orbs" on the negative, then it could either be a light struck negative, or chemical spill, or maybe something phenominal did happen.
In digital photography, there is no film. A digital camera is basicaly a video camera. It works the same way as a video camera, by exposing a CMOS chip instead of film. The only two relavant differences is that a digital or "Still Video" camera gives you much higher definition then a standard video camera, and the images are stored on a memory card instead of negatives and prints. You can make your own photo CD or DVD, and print them out using your own computer and printer, or you can bring them to that same photo processing place and they can put it on a disc, make prints, etc, etc for you (at an inflated price, of course.) If this is the case with the posted picture, your "orbs" are likely dirt that got on the CMOS chip, or it could be something phenominal. I doubt it, though. The way to check, is to take some test photos, and then upload them to a computer. If those same "orbs" appear, then you have a dirty CMOS chip. Mystery solved.
I had a simular experience while out on photo shoot for my work place. I was getting these strange looking "orbs" in the sky of all my out door photos. At first I thought it was the way the light was hitting my lenze. Then I noticed these same "orbs" on wedding cakes I photographed, on the forehead of my infant grand nephew, and in various other places. I removed the lenze, put the camera in "bulb," and pressed the shutter button and held it on so the shutter would stay opened. Sure enough, there were two large dust speces sitting right on the chip. A little compresed air, and then I use the camera's sensor cleaning function to clean the CMOS. The result; no more "orbs."
Again, I am not trying to dispute your claim that you photographed real ghostly orbs, but just offering a possible explination.
Mike