looking for small LED lights for your display?
Posted: Mon Oct 19, 2009 6:44 pm
Hi ya'll. I was looking for some pin spots for my display and couldnt find any cheap ones. I'm not smart enough to make my own and I didnt want to buy a whole 12v system.........so, as I was wondering through Home Depot I came across a display of Iron Bridge LED flash lights. They have 9 super bright LEDs and run off of 3 AAA batteries and they are very small so hiding and mounting them is a snap!
The best part is you get two in a pack for $5 and batteries are included!
I bought 3 packs, they were located on a display near the registers. If you take 3/4 PVC, cut it about and inch or two long then split it down the side you can fit the flashlight in it like a clamp, screw the PVC onto a stake or anywhere you can mount it and you can pivot them as needed. Also, if you want colored lights you can use a gel and place it over the clear lens.
heres what they look like, they are really small so easy to conceal and bright!
![Image](http://img38.imagefra.me/img/img38/2/10/19/f_1m_c819297.jpg)
here it is mounted on the stake
![Image](http://img40.imagefra.me/img/img40/2/10/19/f_1332m_255dc1e.jpg)
The best part is you get two in a pack for $5 and batteries are included!
I bought 3 packs, they were located on a display near the registers. If you take 3/4 PVC, cut it about and inch or two long then split it down the side you can fit the flashlight in it like a clamp, screw the PVC onto a stake or anywhere you can mount it and you can pivot them as needed. Also, if you want colored lights you can use a gel and place it over the clear lens.
heres what they look like, they are really small so easy to conceal and bright!
![Image](http://img38.imagefra.me/img/img38/2/10/19/f_1m_c819297.jpg)
here it is mounted on the stake
![Image](http://img40.imagefra.me/img/img40/2/10/19/f_1332m_255dc1e.jpg)